Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share
One Step Finish Gel Coat - White 5670
Users say:
This product is easy to use and Dries fast, making it perfect for a variety of applications. It provides a tough, hard, and smooth surface, and is a great trade-in value. It also has an orange peel, but the finish looks great.
Evercoat Gel-Kote One Step Finish Gel Coat Repair - WhiteThis is the highest quality ISO NPG One Step Finish Gel Coat that permanently repairs or replaces your vessels' original, high-gloss finish. The gel coat will cure to a hard finish and will not require Evercoat Mold Release (# 105685) in order to attain a fully cured surface. It can be used to fil…
Evercoat Gel-Kote One Step Finish Gel Coat Repair - WhiteThis is the highest quality ISO NPG One Step Finish Gel Coat that permanently repairs or replaces your vessels' original, high-gloss finish. The gel coat will cure to a hard finish and will not require Evercoat Mold Release (# 105685) in order to attain a fully cured surface. It can be used to fill gouges, paint chips, finish scrapes, and deep scratches in your fiberglass gel coat. One Step Finish Gel Coat will not run or sag and its formulation of flexible polyester resins produce amazing resiliency and toughness. So versatile, Evercoat Coloring Agents can be used to tint the material to your desired color. Reduce the one step finish gel coat with Evercoat Acetone (10%) in order to thin for sprayer applications. Superior finish; Resilient, one-step Isophthalic Polyester Gel Coat; Non-run, non-sag formulation; Sizes Available: Pint; Quart; CAN ONLY SHIP WITHIN THE CONTINENTAL U.S.How to Use Evercoat One Step Finish Gel-Kote Remove all paint, grease, oil, dirt or wax. Sand only affected area with coarse grit abrasive. ; Wipe area clean with Evercoat Acetone.; If tinting the Gel-Kote, mix in the color prior to catalyzing the Gel Coat. Use Evercoat Color Agents (maximum 1 oz. color agent per quart of Gel-Kote).; Add the hardener to the Gel-Kote in the following proportion: 12 drops hardener to 1 ounce of Gel-Kote.; Note: the mixed product will start to gel in approximately 15 minutes. Temperatures hotter than 90F will shorten the gel time and temperatures below 70F will lengthen it.; Mix well for 2 to 3 minutes and apply to the repair area. Gel-Kote can be reduced for spraying by adding 10 to 15 percent of Evercoat Acetone.; Apply catalyzed Gel-Kote to a thickness of approximately 20 mils.; The formula will completely cure to a hard surface in approximately two hours.; Clean all tools with Evercoat Acetone before the product hardens. ;
Review summary
AI-generated content
This product is easy to use and Dries fast, making it perfect for a variety of applications. It provides a tough, hard, and smooth surface, and is a great trade-in value. It also has an orange peel, but the finish looks great.
Pros
- Easy to use
- Dries fast
- Sands smoothly
- Matches other colors
- Saves trade-value
Cons
- Slight orange peel
- Not suitable for vertical surfaces
Read original reviews
Description
Evercoat Gel-Kote One Step Finish Gel Coat Repair - WhiteThis is the highest quality ISO NPG One Step Finish Gel Coat that permanently repairs or replaces your vessels' original, high-gloss finish. The gel coat will cure to a hard finish and will not require Evercoat Mold Release (# 105685) in order to attain a fully cured surface. It can be used to fill gouges, paint chips, finish scrapes, and deep scratches in your fiberglass gel coat. One Step Finish Gel Coat will not run or sag and its formulation of flexible polyester resins produce amazing resiliency and toughness. So versatile, Evercoat Coloring Agents can be used to tint the material to your desired color. Reduce the one step finish gel coat with Evercoat Acetone (10%) in order to thin for sprayer applications. Superior finish; Resilient, one-step Isophthalic Polyester Gel Coat; Non-run, non-sag formulation; Sizes Available: Pint; Quart; CAN ONLY SHIP WITHIN THE CONTINENTAL U.S.How to Use Evercoat One Step Finish Gel-Kote Remove all paint, grease, oil, dirt or wax. Sand only affected area with coarse grit abrasive. ; Wipe area clean with Evercoat Acetone.; If tinting the Gel-Kote, mix in the color prior to catalyzing the Gel Coat. Use Evercoat Color Agents (maximum 1 oz. color agent per quart of Gel-Kote).; Add the hardener to the Gel-Kote in the following proportion: 12 drops hardener to 1 ounce of Gel-Kote.; Note: the mixed product will start to gel in approximately 15 minutes. Temperatures hotter than 90F will shorten the gel time and temperatures below 70F will lengthen it.; Mix well for 2 to 3 minutes and apply to the repair area. Gel-Kote can be reduced for spraying by adding 10 to 15 percent of Evercoat Acetone.; Apply catalyzed Gel-Kote to a thickness of approximately 20 mils.; The formula will completely cure to a hard surface in approximately two hours.; Clean all tools with Evercoat Acetone before the product hardens. ;
Specifications
Drying Time | Approximately two hours to harden completely |
Application Method | Brush or spray |
Packaging | Can |
Compatibility | Compatible with Evercoat Mold Release, Evercoat Coloring Agents, and Evercoat Acetone |
Brand | One Step |
Application Surface | Fiberglass gel coat |
Package Contents | Gel-Kote and hardener |
Sheen | High-gloss |
Finish | High-gloss finish |
Formula | Isophthalic Polyester Gel Coat |
Form | Liquid |
Features | Non-run, non-sag formulation; Flexible polyester resins; ISO NPG One Step Finish Gel Coat; Can be reduced for spraying; Can be tinted with Evercoat Coloring Agents; Cures to a hard finish without Mold Release; Permanently repairs or replaces original finish; Fills gouges, paint chips, finish scrapes, and deep scratches |
Package Quantity | Pint or Quart |
Durability | Produces amazing resiliency and toughness |
Application | Repair or replace vessel's original, high-gloss finish |
Color | White |
Cleaning Method | Wipe with Evercoat Acetone before product hardens |
Model | Gel-Kote One Step Finish Gel Coat Repair - White |
Hardness | Cures to a hard finish |
up | Evercoat Acetone |
Surface | Fiberglass gel coat |
Flexibility | Flexible polyester resins |
Product features | Non-run, non-sag formulation; Flexible polyester resins; ISO NPG One Step Finish Gel Coat; Can be reduced for spraying; Can be tinted with Evercoat Coloring Agents; Cures to a hard finish without Mold Release; Permanently repairs or replaces original finish; Fills gouges, paint chips, finish scrapes, and deep scratches |
Quantity | One |
Strength | Produces amazing resiliency and toughness |
Purpose | Repair or replace vessel's original, high-gloss finish |